get voltage reading from () channel

get voltage reading

Get voltage reading from () channel is a reporter block available in evive block. The block gives the value of the voltage sensed on the sensing ports of evive in mili-Volts. There are 2 ports red (voltage range -30 to 30V) and blue (voltage range -5 to 5V). 

evive Notes Icon
Note: This block is available in both Upload mode and Stage mode.


  1. Printing the voltage sensed on the red channel on evive TFT display.
    get voltage form red channel
  2. Printing the voltage sensed on the blue channel on evive TFT display.
    get voltage from blue channel

Content is available under CC BY-SA 4.0 unless otherwise noted.

Related Tutorials, Projects & Documentation
Dabble Home Connected

Getting Started with Dabble

Getting Started with Dabble Introduction Dabble App transforms your Smartphone into a virtual I/O device and lets you control hardware using Bluetooth, communicate with it,…
PictoBlox blocks Scratch how to

Getting Started with PictoBlox

PictoBlox is a programming software based on Scratch, where you can make interactive games, animations or program robots and projects with evive, Arduino, etc..
All articles loaded
No more articles to load
PictoBlox Supported Boards