Programming Platform: Arduino IDE

Projects

Digital-Tachometer

DIY Digital Tachometer

This project will show you how to make a digital tachometer to measure the speed of a motor or any other rotating device.

Dabble App ESP32 Controlled Robot

DIY Dabble Controlled 4 Wheel Robot

This project will show you how to make a DIY 4-Wheel robot that can be controlled using a Smartphone via Dabble, a mobile application.

RC-Shopping-Cart

DIY RC Shopping Cart

This project will show you how to upgrade your regular shopping cart to an RC shopping cart.

DIY Smart Rat Tracker

DIY Smart Rat Trapper

This project teaches you how to make a simple, yet smart DIY rat trap that no rat can ever escape.

DIY Fingerprint Locker

DIY Fingerprint Locker

This project helps you make your own Fingerprint Locker that frees you from the hassle of keeping track of countless locks and their keys.

Lightsaber

DIY Lightsaber

In this project you'll learn how to make your very own lightsaber using evive and other objects around you.

Soccer Playing Robot

DIY Soccer Playing Mobile Robot

In this project, you will learn how to build a soccer-playing mobile robot, which will be controlled using the smartphone app. Communication is done through Bluetooth.

Joystick Controlled Robot

Joystick Controlled Mobile Robot

In this project, you will learn how mobile robot works and how to make a robot which will be controlled using a joystick.

DIY RBG Googles

DIY RGB LED Goggles

This project's about making a pair of cool RGB LED goggles with controllable shades that can be turned up or down as and when you like!

Plant-monitoring-system-2000-x-800.jpg

Plant Monitoring System

This project demonstrates how to track parameters like moisture of the soil, sunlight, humidity, and temperature of the plant environment and display it on evive display.

Magnetic-Table-Hockey

DIY Magnetic Table Hockey

An automated DIY magnetic table hockey with obstacle detection to count goals and real-time scoring.

Simple Robotic Arm

Robotic Arm with Two Motors

In this project, we will make the robotic arm without any end effectors. There will be only two servo motors in the robot. We will control this robot using two potentiometers.

Gripper Control

Controlling Gripper using Potentiometer

A gripper is a device which enables the holding of an object to be manipulated. In this tutorial you will learn how to assemble and control gripper you get with Robotic Arm.

Mounting Upper Plate

Obstacle Avoiding Robot (Modular Mobile Robot)

With an ultrasonic distance sensor attached to a micro servo in the front of the robot, you can scan the 2D plane ahead for obstacles, and move to obstacle-free area autonomously.

Simple Mobile Robot

Smartphone Controlled Robot

In this project we will build a robotic car from scratch and control it using a smartphone via Bluetooth.

Featured Image Pick and Place RObotic Arm

Pick and Place Robotic Arm

This is a four degree of freedom robotic arm capable of picking and placing small objects. With medium sized links, the robotic arm can fit perfectly on your table top.

evive Robotic Arm

Sketching Robot

This is a three degree of freedom robotic arm with a pen holder as its end effector. You can code this robot to draw anything, write your name, sketch your face and much more.

All articles loaded
No more articles to load

Tutorials

Weather Monitoring and Recording

In this tutorial we are going to monitor the variation in the temperature and humidity in a day and storing the data in SD card.

Interfacing GY-521 module with evive

In this tutorial we will interface the GY-521 module with evive. The GY-521 module contains a 3-axis accelerometer, a 3-axis gyroscope, a temperature sensor, and a digital motion processor. We will display the value of each sensor on the serial monitor.
ldr circuit

How to interface LDR sensor with evive ?

The tutorial will shows how to interface ldr sensor with evive and controlling the led state using the sensor.How does ldr sensor works? How to control lights using ldr sensor? All the answers are given in this tutorial.Let's begin...

How to interface Water Flow sensor with evive

In this tutorial, we will discuss how to interface water flow sensor with evive. How water flow rate, current water flowing and output water changes? The water flow rate in liters per hour, current water flowing and output water flowing data flowed since starting is displayed on the screen. All the answers are given in this tutorial.LET'S BEGIN...

Making Digital clock using “TM1637 4-digit display”

In this tutorial we will be making digital clock using "TM1637 4-digit display" and "RTC PCF8563" , we will also use slid switch and two potentiometer to set timing and we will display hours and minutes obtained from "RTC PCF8563" on "TM1637" 4 digit display

Interfacing Joystick module with evive

In this tutorial we will interface joystick module with evive and we will move rectangular box drawn on TFT display according to the movement on joystick module
evive 3.3V Input Output

How to interface 3.3V Digital I/O

This tutorial discusses the use of bidirectional logic shifter as 3.3V digital input and output with the help of an Arduino IDE sketch.

How to use evive’s Real-time Clock

This tutorial discusses what is a real-time clock, and how to use evive's real-time clock to show time, date, and day with the help of an Arduino IDE sketch.
evive Fritzing

How to use evive’s Interrupt pins

This tutorial discusses what are interrupts, and how to use evive's interrupt pins in Arduino IDE with the help of an Arduino IDE sketch.

How to use evive’s Capacitive Touch Inputs

This tutorial discusses what are capacitive touch sensors, evive's capacitive touch input, and how to control the touch sensors in evive, with the help of an Arduino IDE sketch.
Controlling Servo Motor

Servo Sweep using Arduino IDE

In this tutorial we will sweeps the shaft of a RC servo motor back and forth across 180 degrees using Arduino IDE.
controlling gripper

How to interface Servo Motor with Arduino IDE

This tutorial discusses what are servo motors, how to control them, and how to interface them with Arduino IDE using motor control units in evive with the help of an Arduino IDE sketch.

How to interface DC motor with Arduino IDE

This tutorial discusses what are DC motors, how to control them, and how to interface them with Arduino IDE using motor control units in evive with the help of an Arduino IDE sketch.

How to use evive’s Slide Switch

This tutorial discusses different types of switches based on their pole and throw, what are slide switches, and a simple Arduino IDE sketch to display the state of evive's slide switch on the TFT screen.

How to use a Tactile Switch with evive

This tutorial discusses what are switches, types of switches, pull-up and pull-down resistors, and how to control the pin 13 LED on evive using a tactile switch with the help of an Arduino IDE sketch.
TFT Graphics

How to Draw Shapes on TFT Display

This tutorial discusses about the functions in the evive TFT screen library in Arduino IDE that help in drawing different shapes on the display with the help of a simple Arduino Sketch.

How to Manipulate Text on TFT Display

This tutorial discusses how to change the colour and size of text on evive's TFT Display using functions from the TFT library in Arduino IDE.

Getting Started with TFT Display

This tutorial discuss evive's TFT Display, the TFT library in Arduino IDE, and how to display text on the TFT screen.
Arduino IDE while Loop

Arduino IDE: while Loop

This tutorial discusses what is a while loop, its general syntax in Arduino IDE, how it different from a for loop, and how it works.
Arduino IDE for Loop

Arduino IDE: for Loop

This tutorial discusses what is loop statement, a for loop, its general syntax in Arduino IDE, and how it works.
Arduino IDE Increment Decrement Operator

Arduino IDE: Increment & Decrement Operator

This tutorial discusses what are increment operator and decrement operator, two of the many arithmetic operators, their two different structures, and how to use them in Arduino IDE.
Arduino IDE Logical Operators

Arduino IDE: Boolean or Logical Operators

This tutorial discusses what are logic operators and the different types of logic operators in Arduino IDE, such as the AND operator, OR operator, and NOT operator.
arithmetic Operators

Arduino IDE: Arithmetic Operators

This tutorial discusses what are arithmetic operators, and the arithmetic operators in Arduino IDE for addition, subtraction, multiplication, division, and finding out the remainder.
evive arduino variables

Arduino IDE: Variables

A variable is used in programming to store a value (integer, float, character or string) that may change during the life of the Arduino sketch.
arduino logo

Getting Started with Arduino IDE

This tutorial discusses how to install Arduino IDE in Windows, Mac & Linux, and configure Arduino to upload programs (evive Firmware) in evive.
All articles loaded
No more articles to load

Documentations

It seems we can't find any documentation with the selected tag.
Close Menu
×

Cart