Product: ATL Kits
Projects Archive
What is LED (Light Emitting Diode)?
Learn all about LEDs (light emitting diodes): how do LEDs work, interfacing an LED with evive using PictoBlox and projects you can make using LEDs.
How to Read evive’s Switches in PictoBlox
This tutorial discusses what are switches, evive's switches and how to read them in PictoBlox, and making a Torch using evive's pin 13 LED, tactile switch, and potentiometer.
How to Read evive’s Potentiometers in PictoBlox
This tutorial discusses what are potentiometers, evive's potentiometers and how to read them in PictoBlox, and how to control the brightness of an LED using one of evive's potentiometers.
How to interface LDR with evive
This tutorial discusses what are light dependent resistors (LDR) and how to interface them with evive in Scratch with the help of a sample circuit and program in Scratch mode.
What is a Dual-Shaft (DC) Motor?
Learn what is dual-shaft(DC) motor, how does DC motor work, interface it with evive using PictoBlox and what projects to make using a DC motor.
What is a Servo Motor?
Learn what is servo motor, how does servo motor work, interface it with evive using PictoBlox and what projects to make using a servo.
How to Control evive’s Buzzer in PictoBlox
This tutorial discusses what are piezo buzzers, evive's inbuilt buzzer, how to control it in PictoBlox with the help of a simple program in Stage mode.
How to Control evive’s Touch Sensors in PictoBlox
This tutorial discusses what are capacitive touch sensors, evive's capacitive touch input, and how to control the touch sensors in evive, with the help of a simple program in Stage mode.
How to Manipulate evive’s TFT Display
This tutorial discuss evive's TFT Display, the blocks under evive TFT Display extension, and certain example programs to show the usage of different blocks in Scratch mode.
What is an IR Sensor
Learn all about an IR sensor, from what is an IR sensor, how to interface it with evive using PictoBlox, and the projects we can make using it.
What is an Ultrasonic Sensor?
Learn what is an ultrasonic sensor, how does HC-SR05 work, interface it with evive using PictoBlox and what projects to make using an ultrasonic sensor.
How to interface RGB LED strip with evive using PictoBlox
This tutorial discusses what are RGB LED strips, how to interface them with Evive in PictoBlox with the help of a sample circuit.
Interfacing PIR motion sensor with evive
This tutorial describes how to interface PIR motion sensor with evive
How to interface soil moisture sensor with evive?
This tutorial demonstrates how to interface and track moisture of the soil.Display the data on evive display.
How to interface Temperature & Humidity sensor with evive?
In this tutorial we will interface DHT11 temperature and humidity sensor with evive and display the data on the evive display screen.
Interfacing DS18B20 Waterproof Digital Temperature Sensor with evive
In this tutorial we will interface DS18B20 waterproof digital temperature sensor with evive and we will display temperature measured by this temperature sensor on "TFT" display
Interfacing MQ-2 Gas Sensor with evive
In this tutorial, you will learn how MQ2 gas sensor works, how to interface the sensor with evive and how to calculate the PPM value for different gases.
How to interface Flex sensor with evive
This tutorial discusses what are Flex sensors, how to interface them with Evive in Scratch with the help of a sample circuit and program in Scratch mode.
Interfacing Relay with evive
This tutorial explains interfacing of a relay module with evive for controlling high power circuits like AC bulb with help of evive.
How to Send Data to Cloud (ThingSpeak) using ESP8266?
In this tutorial, you will learn what is Internet of Things and ThingSpeak. Also you will send sensor data to the ThingSpeak channel.How to Retrieve Data from Cloud (ThingSpeak) using ESP8266?
In this tutorial, we will retrieve the sensor data from the cloud (ThingSpeak) using evive and ESP8266.How get weather data from location using OpenWeatherMap?
In this tutorial, we will retrieve different weather parameters of a location using latitude and longitude.
How to interface water pump with evive?
This tutorial discusses how we can interface water pump with evive . How we can control the speed of water flow using the evive menu? How we can control the speed using potentiometer with a simple scratch code.All the answers are given in this tutorial.LET'S BEGIN....
Getting Started with Arduino IDE
This tutorial discusses how to install Arduino IDE in Windows, Mac & Linux, and configure Arduino to upload programs (evive Firmware) in evive.
Arduino Sketch: Structure and Flow
This tutorial discusses the basic structure of an Arduino sketch and the top-to-bottom execution of program instructions.
Arduino IDE: Variables
A variable is used in programming to store a value (integer, float, character or string) that may change during the life of the Arduino sketch.
Arduino IDE: Arithmetic Operators
This tutorial discusses what are arithmetic operators, and the arithmetic operators in Arduino IDE for addition, subtraction, multiplication, division, and finding out the remainder.
Arduino IDE: Comparison or Relational Operator
This tutorial discusses what are relational operators and the different relational operators in Arduino IDE.
Arduino IDE: Boolean or Logical Operators
This tutorial discusses what are logic operators and the different types of logic operators in Arduino IDE, such as the AND operator, OR operator, and NOT operator.
Arduino IDE: Conditional(if-else-if) Statements
This tutorial discusses what are conditional statements, and their different types in Arduino IDE, such as the if statement, if-else statement, and if-else-if statement.
Arduino IDE: Increment & Decrement Operator
This tutorial discusses what are increment operator and decrement operator, two of the many arithmetic operators, their two different structures, and how to use them in Arduino IDE.
Arduino IDE: for Loop
This tutorial discusses what is loop statement, a for loop, its general syntax in Arduino IDE, and how it works.
Arduino IDE: while Loop
This tutorial discusses what is a while loop, its general syntax in Arduino IDE, how it different from a for loop, and how it works.
How to Install a Library in Arduino IDE
This tutorial discusses what are libraries, how to install them and include them in Arduino IDE sketches.
Blink with Firmware on evive
This tutorial explains how we can access evive firmware even when some other code is running on evive.
Getting Started with TFT Display
This tutorial discuss evive's TFT Display, the TFT library in Arduino IDE, and how to display text on the TFT screen.
How to display values of variables on evive’s TFT screen line by line
In this tutorial you will learn to display values of variables on TFT screen line by line.
How to Manipulate Text on TFT Display
This tutorial discusses how to change the colour and size of text on evive's TFT Display using functions from the TFT library in Arduino IDE.
How to Draw Shapes on TFT Display
This tutorial discusses about the functions in the evive TFT screen library in Arduino IDE that help in drawing different shapes on the display with the help of a simple Arduino Sketch.
DIY Follow Me Robot
Here, you will learn how to make an autonomous robot which will follow the object in front of it.
How to use evive’s Digital Pins as Output Pins
This tutorial discusses about the digital pins in evive, how to configure them as OUTPUT in Arduino IDE with the help of a simple example of controlling an LED.
How to use evive Digital Pins as Input Pins
This tutorial discusses how to configure the digital pins in evive as INPUT in Arduino IDE, with the help of a simple example using evive's tactile switch.
How to use a Tactile Switch with evive
This tutorial discusses what are switches, types of switches, pull-up and pull-down resistors, and how to control the pin 13 LED on evive using a tactile switch with the help of an Arduino IDE sketch.
How to interface DC motor with Arduino IDE
This tutorial discusses what are DC motors, how to control them, and how to interface them with Arduino IDE using motor control units in evive with the help of an Arduino IDE sketch.
How to interface Servo Motor with Arduino IDE
This tutorial discusses what are servo motors, how to control them, and how to interface them with Arduino IDE using motor control units in evive with the help of an Arduino IDE sketch.
Controlling Servo Motor (Setting Angle) using Arduino IDE
In this tutorial, we will control Servo Angle connected to evive and Arduino using Arduino IDE functions.Servo Sweep using Arduino IDE
In this tutorial we will sweeps the shaft of a RC servo motor back and forth across 180 degrees using Arduino IDE.
Controlling Servo Angle using Joystick in Arduino IDE
In this tutorial we will control the position of a RC (hobby) servo motor with a Joystick.
How to control evive’s buzzer in Arduino IDE
This tutorial discusses what is a piezo buzzer, evive's inbuilt buzzer, how to control it in Arduino IDE with the help of an Arduino IDE sketch.
How to configure the HC05 Bluetooth Module using AT Commands
This tutorial discusses what is Bluetooth, how does it work, the HC05 Bluetooth module, serial communication, and how to setup the Bluetooth module with the help of an Arduino IDE sketch.
How to control Pin 13 LED using Smartphone via Bluetooth
In this tutorial you will be turning on and off led Pin-13 of evive via smartphone.
DIY Dabble Controlled 4 Wheel Robot
This project will show you how to make a DIY 4-Wheel robot that can be controlled using a Smartphone via Dabble, a mobile application.
How to use evive’s Capacitive Touch Inputs
This tutorial discusses what are capacitive touch sensors, evive's capacitive touch input, and how to control the touch sensors in evive, with the help of an Arduino IDE sketch.
How to use evive’s Real-time Clock
This tutorial discusses what is a real-time clock, and how to use evive's real-time clock to show time, date, and day with the help of an Arduino IDE sketch.
How to interface ESP8266 Wi-Fi Module with evive
The tutorial discusses the ESP8266 Wi-Fi Module, how to connect it to evive, and how to configure it for IoT applications using AT commands by writing an Arduino IDE sketch.
Interfacing HC-SR04 Ultrasonic sensor with evive
In this tutorial we will interface HC-SR04 Ultrasonic sensor with evive and we will calculate distance between ultrasonic sensor and obstacle form which ultrasound waves are reflected
Interfacing Joystick module with evive
In this tutorial we will interface joystick module with evive and we will move rectangular box drawn on TFT display according to the movement on joystick module
Interfacing KY-003 Hall magnetic sensor with evive
In this tutorial we will interface KY-003 Hall magnetic sensor with evive and we will display whether magnetic field is present or not on TFT display
Interfacing Key Switch Module with evive
The tutorial will show how to interface key switch module with evive and display the state of the switch on TFT Display.
Interfacing 2-color led module with evive
In this tutorial we will interface 2-color led module with evive and we will produces different color combination's using this led
DIY Password Based Door Lock
This project will show you how to make your own Password-Based Door Lock.
Interfacing MQ-4 Gas sensor with evive
In this tutorial we will interface MQ-4 Gas sensor module with evive and if Gas concentration exceed specific concentration we will glow led
Making Digital clock using “TM1637 4-digit display”
In this tutorial we will be making digital clock using "TM1637 4-digit display" and "RTC PCF8563" , we will also use slid switch and two potentiometer to set timing and we will display hours and minutes obtained from "RTC PCF8563" on "TM1637" 4 digit display
Interfacing RGB LED module with evive
In this tutorial we will interface KY-009 RGB module with evive and we will produce red ,green and blue color using single led
Interfacing Fingerprint Sensor R307 with evive – Enrolling Fingerprints
This tutorial will show you how to enroll a fingerprint in Fingerprint R307 Sensor and displaying the process on evive TFT screen.
DIY Projects For Halloween – How to Make a Terrifying Halloween Town
This project will show you how to make your own DIY Halloween Town for Halloween using what we made in some of the previous projects and a DIY PIR sensor activated jack-o’-lantern.
Interfacing Fingerprint Sensor (R307) with evive – Fingerprint Matching
This tutorial will show how to matching fingerprint on the Fingerprint Sensor and displaying the process on evive TFT screen.How to interface LDR sensor with evive ?
The tutorial will shows how to interface ldr sensor with evive and controlling the led state using the sensor.How does ldr sensor works? How to control lights using ldr sensor? All the answers are given in this tutorial.Let's begin...
DIY Battle Tank
This project will show you how to make a DIY Battle Robot Tank.
How to interface Water Flow sensor with evive
In this tutorial, we will discuss how to interface water flow sensor with evive. How water flow rate, current water flowing and output water changes? The water flow rate in liters per hour, current water flowing and output water flowing data flowed since starting is displayed on the screen. All the answers are given in this tutorial.LET'S BEGIN...
How to interface raindrop sensor with evive?
This tutorial discusses how to interface raindrop sensor, its working and how to interpret the output data?All the answers are given in this tutorial.LET'S EXPLORE....
Interface temperature sensor(LM35) with evive
This tutorial discusses how we can interface LM-35 temperature sensor with evive and display the data on the evive tft display .LET'S BEGIN....
How to interface 16 X 2 LCD with evive?
This tutorial discusses how we can interface 16 X 2 with evive . How we can display the data on the lcd? All the answers are given in this tutorial.LET'S BEGIN....
Interfacing GY-521 module with evive
In this tutorial we will interface the GY-521 module with evive. The GY-521 module contains a 3-axis accelerometer, a 3-axis gyroscope, a temperature sensor, and a digital motion processor. We will display the value of each sensor on the serial monitor.
Scratch: How Sprites Interact?
Each sprite has its own scripting area, where the scripts are written perticularly for that sprite. This tutorial shows how two sprites can communicate.
What is Stage and Sprite in Scratch?
In this tutorial you will learn about stage and sprite in detail. You will get to know how to write script and change costumes for each one.
How to do Animation in Scratch?
Creating animation is one of the most important application of Scratch. In this tutorial we will make a flying bat animation.
DIY Soccer Playing Mobile Robot
In this project, you will learn how to build a soccer-playing mobile robot, which will be controlled using the smartphone app. Communication is done through Bluetooth.
DIY RGB LED Goggles
This project's about making a pair of cool RGB LED goggles with controllable shades that can be turned up or down as and when you like!
Automatic Plant Lighting System
In this project, we will make an automatic plant lighting system which will be controlled with the help of the LDR sensor. What is power LED? How we can control it? We will find it in this project.
Advance Automated Plant Watering System with IoT
In this project, you will automate the plant watering system and send all data to the cloud (ThingSpeak). We will also automate the watering process based on the moisture level.
The Breakdance Showdown
The Breakdance Showdown is a simple Scratch game for beginners that anyone can make in Scratch. The aim of the game is to click on the drum to make the dancer dance and watch him steal the show!
Plant Monitoring System
This project demonstrates how to track parameters like moisture of the soil, sunlight, humidity, and temperature of the plant environment and display it on evive display.
Drip Irrigation System
In this project you will learn how to develop a mini drip irrigation system for your garden. It will help you water plants, shrubs, and trees in your garden with precision and ease.
Wirelessly Controlled Drip Irrigation System
In this project, you will control the drip irrigation system wirelessly using your smartphone. By using Bluetooth module and evive you will control the water-pump and thus be watering the plants.
DIY Turntable | Become an Artist
In this project, you will learn how to make a small DIY turntable, whose speed and direct on can be controlled using evive's slide switch and potentiometer.
Touch-Based Piano
Make an eight key DIY piano using capacitive touch inputs. The sound is generated using a piezo buzzer which is in-built (in evive).
Dodge
The aim of the game is to control the kid and dodge the objects coming his way for as long as possible. You can’t dodge them forever; because basically we are playing a game of survival and the challenge essentially is to stay in the game for as long as possible.
Shoot the Bat
In this project, you'll learn how to make animations and develop a game using coding.
Controlling LED with Keyboard
LEDs are like tiny light-bulbs. Learn how to control a LED with your keyboard using Scratch.
All articles loaded
No more articles to load
