move () in () axis in () ms

Move to () in () axis in () ms block is a stack block available in Robotic Arm extension for evive and other Arduino boards. The block sets the end-effector to move by specified value in the selected axis and the other two positions remain the same.

Input Parameters

  1. Value by which the robotic arm moves.
  2. Drop down to choose between X, Y, and Z axis.,
  3. Time to complete the move.
evive Notes Icon
Note: This block is available in both Stage and Upload mode.

Example

In this script, we will make the robotic arm move 10 in the X-axis when the up arrow key is pressed and on pressing the right arrow key, the robot will move 10 on Y-axis.     move to block example

evive Notes Icon
Note: Before working with the Robotic Arm, we need to calibrate the robotic arm. To calibrate the robotic arm, click here.

Content is available under CC BY-SA 4.0 unless otherwise noted.

Related Tutorials, Projects & Documentation
evive Robotic Arm

Sketching Robot

This is a three degree of freedom robotic arm with a pen holder as its end effector. You can code this robot to draw anything, write your name, sketch your face and much more.

Gripper Control

Controlling Gripper using Potentiometer

A gripper is a device which enables the holding of an object to be manipulated. In this tutorial you will learn how to assemble and control gripper you get with Robotic Arm.

Simple Robotic Arm

Robotic Arm with Two Motors

In this project, we will make the robotic arm without any end effectors. There will be only two servo motors in the robot. We will control this robot using two potentiometers.

PictoBlox Supported Boards
Extensions